HPI Baja 5B 5T and 5SC Products

Turtle Racing has been a staple in the Large Scale RC Market, with it’s roots embedded in the HPI Baja 5B buggies, 5T trucks, and 5SC Short Course Trucks.

Products list

  • Turtle Racing Baja Grabber Bell

    Product code: TUR-3001 Turtle Racing Billet “Grabber” Clutch Bell for TR HD Clutch Systems The Turtle Racing Grabber Bell is made from 1pc Billet Steel. The cooling benefits are huge and the strength of the bell is maintained, not cut away, all while providing light weight, low rotating mass. The grooves right in the contact […]

    Read more ›

  • Baja Alloy Servo Saver

    Product code: TUR0028-RW

    Turtle Racing has developed a servo saver HPI Baja series. No more broken plastic or worn out cams. The spring provides solid linear action, smooth through the whole action. There are eight sealed bearings in this unit.

    Read more ›

  • V2 HPI Baja Clutch Case

    Product code: TURV008

    6061 Billet Aluminum Clutch housing for all Baja models. Cooling fins added, well proven for removing heat. This clutch housing will help cool your clutch and motor. Much stronger than stock cast housing.

    Read more ›

  • V2 HD Racing Clutch System Hpi Baja

    Product code: TURV0012-RW

    New Cooling fins- Runs average of 60% cooler than ANY carrier. Lower temps will provide increased clutch shoe and bearing life. Vented to allow hot gasses and dust to escape, this prevents gasses and dust from being forced into crank bearings and no dirt gets in.

    Read more ›

  • HD Quick Diff For The Baja

    Product code: TUR0016

    This is not a carbon copy of the stock trans. It is made from 6061 Billet Aluminum so not only does it cure the exploding trans problem, but now you can remove/maintain your diff in a fraction of the time without removing the Transmission!

    Read more ›

  • Race Edition HD Clutch System For The HPI Baja

    Product code: TUR0015

    The Race Edition comes complete with Open Carrier, Bell, gear plate, pinion gear, hardware and bearings. This has the Large Bell Bearings, Huge M6 pinion screw, all the benefits of the original HD Clutch System, just with an open carrier.

    Read more ›

  • Tranny Plate For The HPI Baja

    Product code: TUR0010

    This Tranny Plate is twice as thick as the Stock Tranny Plate and is made from Billet 6061 aluminum. This HD Tranny plate will greatly reduce flex and help keep the whole Rear end of your Baja secure. It has been lightened as much as possible without reducing strength.

    Read more ›

  • Gear Plate For The Hpi Baja

    Product code: TUR0011

    This TR Gear Plate eliminates the stock 3-piece assembly, including the plastic 2-piece block that holds the spur gear bearing. The TR Gear Plate has been designed with strengthening and cooling ribs around the spur gear bearing to help dissipate heat and add strength to the bearing journal.

    Read more ›

  • Baja 5T Front Chassis Brace

    Product code: TUR0014

    This HD Top Plate is twice as thick as the stock plate, made out of 6061 Billet Aluminum and pocketed in all the right places for proper fit.

    Read more ›

  • Baja 5B Front Chassis Brace

    Product code: TUR0009

    This HD Top Plate is twice as thick as the stock plate, made out of 6061 Billet Aluminum and pocketed in all the right places for proper fit. The TR HD Plate is cut out specifically for a snug fit with the servo box.

    Read more ›

  • 5T Shock Tower/Mount

    Product code: TUR0013

    A basher’s dream, this much-needed item will provide your Baja with a huge increase in toughness on the front end. We have taken our HD Front Shock Mount and designed it right into the Tower, eliminating the need for 2 separate pieces and Making one very strong unit.

    Read more ›

  • Baja 5B Shock/Tower Brace

    Product code: TUR0007

    A basher’s dream, this much-needed item will provide your Baja with a huge increase in toughness on the front end. We have taken our HD Front Shock Mount and designed it right into the Tower, eliminating the need for 2 separate pieces and making one very strong unit.

    Read more ›

  • Diff. CaseSaver

    Product code: TUR0002

    Turtle Racing Billet Case Saver for the HPI Baja 5b differential case. This top-quality billet aluminum upgrade will strengthen your Baja differential. Stops the ‘case warp’ and helps stop leaking.

    Read more ›

  • Baja 5B Front Shock Brace

    Product code: TUR0006

    The mounts are designed to be much stronger than any other. They encapsulate the upper shock mount – no more bent shock screws. This is very important with all the new stronger shocks entering the market.

    Read more ›

  • V2 Rear Shock Brace For The HPI Baja

    Product code: TUR0005

    These “Original” Turtle Racing shock mounts are truly Heavy Duty and now improved. They are designed to be much stronger than any other. They encapsulate the shock – no more bent shock screws. This is very important with all the new stronger shocks entering the market.

    Read more ›

  • HD Diff Shaft Set For The HPI Baja

    Product code: TUR0003

    Turtle Racing modified differential shaft set for the HPI Baja 5B/5T. Consists of a modified version of HPI part number 86470 (differential shaft set).

    Read more ›

  • HD Drive Axle Set For The Baja 5B

    Product code: TUR0004

    Turtle Racing modified drive axle set for the HPI Baja 5B/5T. Consists of a modified version of HPI part number 86488 (drive shaft set). A custom-made strengthening ring has been welded to the outside of the cups to add rigidity to the cups.

    Read more ›

  • Solid HD Clutch Bell For Baja

    Product code: TUT1001

    This is a replacement bell for TR HD and Race Edition Clutch System. The bell is made with a larger shaft to fit in the larger bearings used in the TR HD clutch systems. Proudly made in the USA! All Products Are Subject To Change From Pictures Without Notice Buy Now  

    Read more ›

  • TR Pinions For The HPI Baja

    Product code: TUR12XX

    These Turtle Racing pinion gears are specificaly designed to work with the TR HD clutch system for the HPI Baja.The pinions come in 16t, 17t, 18t, 19t and 20t sizes to fit almost any gear combo on the market.

    Read more ›

  • Transmission Caps For The HPI Baja

    Product code: TUR2016

    Finish off your Turtle Racing Quick Diff Transmission or stock transmission with this cap spike made from billet aluminum!!

    Read more ›

  • One Piece Brake Mount For The Hpi Baja

    Product code: TUR0018

    The TR 1pc. Brake Mount also makes assembling the brake system a LOT easier since it is assembled off the Baja and simply drop the assembly into place and fasten.

    Read more ›

  • Shock Tower Bushings For The HPI Baja

    Product code: TUR0017

    The bushings replace the stock front upper shock bushings on the HPI Baja.

    Read more ›